%SEISJOB PROJNAME:MarineTut_KJ ! Name of project LINENUM:IMAGING !* Enter line number/name PROCID:guym !* Processor identification JOBTITLE: ! title of job (for plots etc...) %COMMENT_S: !Optional Job Control System parameters %COMMENT: ! JCS_FILE: ! I Optional Job Control Lines file (*.jcs) !FILELIST=*.jcs !SDE=JOBCONTROL VARIABLES: ! List of JCS variables in this *.job file VAR_LINKS: ! List of links between variables and *.jcl file column headers JCS_TAIL:_ ! What to add on to master job name to make sub-jobs !OPTIONS={_;_;__} SEP_LOGS:Yes ! Answer yes to get different log files for each sub-job !YESNO SUBSFILE1: ! I 1st text file for which variable subsitutions are to be made SUBSFILE2: ! I 2nd additional text file to be substituted SUBSFILE3: ! I 3rd additional text file to be substituted SUBSFILE4: ! I 4th additional text file to be substituted %COMMENT_S: !These fields aren't used by the seismic job, & are for your own documentation %COMMENT: ! INFO_FILE: ! I Name of file to keep tips and comments about this job !EDIT COMMENT1: ! First part of comment to help you remember what this job does COMMENT2: ! (continuation of COMMENT1) COMMENT3: ! (continuation of COMMENT1 & 2) COMMENT4: ! (continuation of COMMENT1 to 3) %DSORT_OFF DISCFILE:../DATA/job4_radon.cdp !*I Name of the seismic data file ! FILELIST=$DATA_DIR !SLI_D !FCR=DSORT_OFF:DISCFILE SAMPRATE:4.0 ! Sample rate [ms] (only needed if DISCFILE doesn't exist yet) TRLEN:6148.0 ! Data trace length to be read from file [ms] NTRACES: ! Overestimate of no of traces in the input file (if file doesn't exist) %COMMENT: ! BINVALS:-3220:-270/50 !* Offset bin start, end and increment (eg -3000:3000/25) BINSIZE:26 !* Max allowed difference between header offsets and bin values %LESS: ! PADCDPS:Yes ! Y to output dummy CDPs to fill in missing gaps !YESNO VERBOSE:Yes ! Y to output statistics on bin contents !YESNO BINVAL_HDR:spare1 ! t Optional trace header keys to save the bin centres into !TRHEADER %NMO SDEFILE:../VELOCITIES/GNS_pass1_cva.nmo !*I Time-Velocity filename (*.nmo) !FILELIST=*.nmo !SDE=NMO !ISOVELS MUTE: ! Percentage stretch mute TAPER:20 ! Stretch mute taper length GRID1:20 200 25 500 50 1000 100 ! Vertical interpolation grid %MORE: ! GRID2: ! MUTEMODE:First sample ! Stretch mute method (Mute to first good sample; Mute all bad samples) !OPTIONS={Top-mute;Sample-mute} VSCALAR:1.0 ! Optional scalar to apply to all velocities in the NMO file INVERSE:Forwards ! F for Forward NMO, I for Inverse NMO !OPTIONS={Forwards;Inverse} APPLY:Yes ! N => only the stretch mute applied and no NMO !YESNO %SMUTE SDEFILE:../MUTES/GNS_21_cdp.smu !*I File with data (*.smu) !FILELIST=*.smu !SDE=SMUTE ENDSURG:End !* [END/SURG] for end mute or surgical mute !OPTIONS={End;Surg} UNITS:Metres ! If file has SKEY=OFFSET, these are units !OPTIONS={Metres;Decimetres} RON: ! Length of the linear/cosine on-ramp [ms] ROFF: ! Length of the linear/cosine off-ramp [ms] %COMMENT: ! ADDTIME: ! t Trace header name with times to be added to times in SDEFILE!TRHEADER ADJUST:0.0 ! Constant time [ms] to add to all times in the input file TAPERTYPE:Cosine ! Taper type !OPTIONS={Cosine;Linear;Cos-squared} TAPERMODE:Start-of-taper ! Taper mode. Mute time is ... !OPTIONS={Start-of-taper;Centered;End-of-taper} %COMMENT: ! APPLY:Yes ! Answer No if you don't want the traces actually muted !YESNO TKEY_ON: ! t Trace header key to receive the on times !TRHEADER %MORE: ! TKEY_OFF: ! t Trace header key to receive the off times !TRHEADER %SETHEADER TRACE_HDRS:offset=spare1 ! T List of trace header definitions (eg "TRTYPE=1 COORD_SCALE=2" !SEISHELP appendix_a REEL_HDRS: ! R List of reel binary header settings !SEISHELP appendix_a %DMO_TX CDPRANGE:100 1969 !* First and last CDPs to process (eg 100 200) CDP_DX:12.5 !* CDP spacing in metres N_OFFMIX:1 !* Number of offsets to mix in output (see help) OFFMAX:-3220 !* Maximim offset that will be present [m] TMUTE:3000 ! Mute time at the maximum offset [ms] VRMS:1500 ! RMS velocity at the mute time [m/s] REPLACE:Yes ! Answer Yes to replace offsets with offset-plane values in output !YESNO %LESS: ! N_TSHIFT:400 ! Maximum number of time shifts to use OFFBINS: ! List of offset planes to process if input NOT via DISCSORT/DSORT_OFF VERBOSE:Yes ! Y to print out each offset as its processed !YESNO %SMUTE SDEFILE:../MUTES/GNS_21_cdp.smu !*I File with data (*.smu) !FILELIST=*.smu !SDE=SMUTE ENDSURG:End !* [END/SURG] for end mute or surgical mute !OPTIONS={End;Surg} UNITS:Metres ! If file has SKEY=OFFSET, these are units !OPTIONS={Metres;Decimetres} RON: ! Length of the linear/cosine on-ramp [ms] ROFF: ! Length of the linear/cosine off-ramp [ms] %COMMENT: ! ADDTIME: ! t Trace header name with times to be added to times in SDEFILE!TRHEADER ADJUST:0.0 ! Constant time [ms] to add to all times in the input file TAPERTYPE:Cosine ! Taper type !OPTIONS={Cosine;Linear;Cos-squared} TAPERMODE:Start-of-taper ! Taper mode. Mute time is ... !OPTIONS={Start-of-taper;Centered;End-of-taper} %COMMENT: ! APPLY:Yes ! Answer No if you don't want the traces actually muted !YESNO TKEY_ON: ! t Trace header key to receive the on times !TRHEADER %MORE: ! TKEY_OFF: ! t Trace header key to receive the off times !TRHEADER %NMO SDEFILE:../VELOCITIES/GNS_pass1_cva.nmo !*I Time-Velocity filename (*.nmo) !FILELIST=*.nmo !SDE=NMO !ISOVELS MUTE: ! Percentage stretch mute TAPER:20 ! Stretch mute taper length GRID1:20 200 25 500 50 1000 100 ! Vertical interpolation grid %LESS: ! GRID2: ! MUTEMODE:First sample ! Stretch mute method (Mute to first good sample; Mute all bad samples) !OPTIONS={Top-mute;Sample-mute} VSCALAR:1.0 ! Optional scalar to apply to all velocities in the NMO file INVERSE:Inverse ! F for Forward NMO, I for Inverse NMO !OPTIONS={Forwards;Inverse} APPLY:Yes ! N => only the stretch mute applied and no NMO !YESNO %GENSORT %COMMENT: !Fill in section 1 or 3. If you use section 1 and MAXFOLD>1, fill in section 2 %COMMENT: ! MAXFOLD:60 !* Maximum output fold NRELEASE:1 !* No of times to release the sorted traces DUMMY_IN:No !* Y=>Output dummy and muted traces as well !YESNO UNSORT:No ! Y=>Output unsorted data before sorted data !YESNO RANDOM:No !* Answer Y to scamble up output ordering of primary keys !YESNO %COMMENT_S: ! Section 1 : Primary key definition and ordering %COMMENT: ! PKEYNAME:CDP ! t eg SHOTID,CDP,OFFSET,REC_PEG etc !TRHEADER PKEY1:100 ! Enter first Pkey value to be output PKEY2:1969 ! Enter the last primary key to be output PKEYINC:1 ! Primary key increment %COMMENT_S: ! Section 2 : Secondary key definition and ordering %COMMENT: ! SKEYNAME:CDPTRACE ! t eg CHANNEL, CDPTRACE, OFFSET !TRHEADER %COMMENT: ! %COMMENT: ! Use next 3 fields ONLY if you want a constant secondary key output ordering %COMMENT: ! SKEY1:1 ! Enter first Skey value to be output SKEY2:60 ! Enter the last secondary key to be output SKEYINC:1 ! Secondary key increment %COMMENT: ! %COMMENT: ! For varying secondary key output ordering, enter %COMMENT: ! RESORT: ! 1=increasing,2=decreasing,3=MAGNITUDE increase,4=magnitude decrease %LESS: ! %COMMENT: ! Section 3 : Output ordering stored in file %COMMENT: ! SDEFILE: ! I Filename containing lists of sorted output header values (*.sort) !FILELIST=*.sort !SDE=GENSORT MAXLINES: ! Max no of lines in FILENAME FRESORT: ! Same as in section 2 (optional) MAXPKEYS: ! Max no of Pkeys in FILENAME %DISCWRITE FILENAME:../DATA/28_job5_dmo.cdp !*O Output disc file name !SAVEFILE=$DATA_DIR %LESS: ! HDRTRACE: ! t Use this if you want to write out pseudotraces from the header !TRHEADER TRLENGTH: ! Specify the trace length if you want to truncate the output [ms] PKEYF:100 ! List of first key values to write to file PKEYL:1969 ! List of last key values to write to file FOLD:60 ! Set this to override the number of traces per primary key. UNSORT:No ! Answer Yes to unsort data read using the DISCSORT processor!YESNO INDEX_OK:Yes ! Answer No only if you do NOT want an index file created !YESNO