471 Posts in 231 Topics by 67 members
Geometry
If this is your first visit, you will need to register before you can post. However, you can browse all messages below.
Moderators: Andy Juniper , Guy Maslen , Keleigh Jones
| Page: 1 | Go to End | |
| Author | Topic: source elevation | 2652 Views |
source elevation 
19 April 2012 at 9:38am Last edited: 23 April 2012 3:16pm
i have old data in which receiver elevation and soure elevation present seperately. i have punched both elevations.
how we setup the geomety in which we use both receiver elevation and source elevation. i am using the ASCII to sur and ASCII to obl method for creating the geometry and i did not found any option for source elevation. Please suggest
Regards
masood
Re: source elevation
22 April 2012 at 5:09pm Last edited: 23 April 2012 9:45pm
The survey file (.sur) contains both the survey pegs and there associated elevation related to the source and receiver position, so both source and receiver elevations are used. The observer file (.obl) then identifies which peg is associated with a source position and which are receiver positions.
Hope this clarifies how Claritas sur and obl files use source and receiver information.
| 2652 Views | ||
| Go to Top |