472 Posts in 232 Topics by 68 members

Common Issues & FAQ

Forum » Common Issues & FAQ » 2D Marine Offsets

If this is your first visit, you will need to register before you can post. However, you can browse all messages below.

Moderators: Andy Juniper , Guy Maslen , Keleigh Jones

Page: 1 Go to End
Author Topic: 2D Marine Offsets 2691 Views

2D Marine Offsets Link to this post

In GLOBE Claritas we usually set 2D marine offsets to be negative numbers (as the cable is behind the vessel/source); all of the simple 2D geometry assigning modules (MGEOM, QSORT) use this convention. This is not a requirement - all modules will function for marine data using positive offsets, but care needs to be taken when transfer data to and from other processing packages that may use a different convention, and with some modules (for example OFFREG) where the sign of the offset needs to be considered.

    2691 Views
Go to Top