453 Posts in 222 Topics by 67 members

Input and Output

Forum » Input and Output » SEGD Vanguard Format

If this is your first visit, you will need to register before you can post. However, you can browse all messages below.

Moderators: Andy Juniper , Guy Maslen , Keleigh Jones

Page: 1 Go to End
Author Topic: SEGD Vanguard Format 2514 Views

Re: SEGD Vanguard Format Link to this post

Aaron,

You are correct that you should concatenate the HD and SD files, in terms of extracting further information from the trace headers you will need to define a claritas SDHD file mapping byte locations from the SegD General/External or Extended trace header blocks to Claritas trace header locations.

This will be easier if you have some documentation describing what byte and header blocks the information you are wanting to pull out is stored in.

If you need any further assistance then if you can send an example SegD file(s) before or after concatenation to the Claritas.Support.gns.cri.nz email address along with any information you have about byte locations for your key headers we can see what we can do for you.

Regards

Andy Juniper

    2514 Views
Go to Top